meltblown cartridges
Operation
- Spun Cartridges are made up of 100% Polypropylene
fibers. The fibres have been carefully spun together to
form a true gradient density from outer to inner
surface.
- The superior structure remains integral even
under severe operating conditions and there is no
media migration. Polypropylene fibers are blown
continuously on central molded core.
Applications of Melt blown Cartridges
- Food and Drinks Industry
- Cosmetic Industry
- Pharmaceutical Industry
- Process water
- Reverse osmosis pre treatment
- Water based solutions
- Solar heating industry
- Petrochemical industry
- Metal finishing
- Electronic
SALIENT FEATURES
- Superior flow with low pressure drop
- High dirt holding capacity
- 100% Polypropylene for wide chemical Compatibility
- Single piece construction
- Nominal & absolute filtration available
Technical Data
Construction | Filter Media | Polypropylene |
| Core | Polypropylene |
End connections | DOE, SOE(fin222, fin226, flat222, flat226) |
|
Micron rating | 1, 5, 10, 25 µm |
|
Surface area | Standard (OD 61 mm) | ≥ 0.52 ft² per 10” cartridge length |
| Jumbo (OD 110 mm) | ≥ 0.94 ft² per 10” cartridge length |
Maximum operating | Recommended change-out differential pressure* | 0.12 MPa @ 21°C (69.8°F) |
conditions | Maximum operating temperature | 70°C ( 158°F ) |
Dimensions (nominal) | Length | 10”, 20”, 30”, 40” |
| Standard OD/ID | 61±0.5 / 27.5±0.5 mm |
|
| Other OD & Length available on request |
other products
